+420 123 456 789
Welcome to your website!
This is just a sample text which you should edit to make your own custom welcome message - write a brief description of your website or add a company overview. You can edit it by clicking on the text itself or by clicking on the yellow edit button which appears next to it when you move your cursor over the text. The Webgarden logo in the upper left-hand corner allows you to access technical support, the VIP shop, and other useful features.
As interior fashions changed cast iron radiators were thought of being too big and obtrusive and steel radiators were consider ugly, so homeowners discarded them, boxed them in or simply painted them, but in the 21st Century we have seen the radiator market come full circle. Yet again radiators have become a desirable feature in our homes.

Franz San Galli, a Polish-born Russian businessman, invented an early form of radiator between 1855-1857, and two distinguished inventors known as Joseph Nason and Robert Brigss also designed and produced a radiator using vertical wrought iron tubes screwed into a cast iron base in 1863. In 1872, Nelson H Bundy came up with the "Bundy Loop", a popular cast iron radiator design that is still reflected in products we see today.

However, there are various people who are claimed to have invented the radiator as we would recognise it today. All evidence points to their development occurring sometime around the mid 19th Century.

Cast iron remains a popular choice amongst today's heating engineers and architects, particularly for older properties that could otherwise be prone to damp. Radiators made of cast iron stay warm long after the central heating has been turned off, providing a constant, gentle undulating heat, which retains the warmth in the fabric of the building, as well as heating the interior space. Today's trend of restoring period properties back to their original splendour has re-launched the cast iron radiator that now claims pride of place in many homes.

You can speak to their team in person and see over 160 models on display at their West Yorkshire showroom, call them on 01274 567789 or visit www.featureradiators.co.uk

Contemporary radiators are now available in wide variety of wonderful shapes sizes and finishes, from sleek minimalist radiators that fit close to the wall to wow-factor feature radiators that make a unique and stunning statement.

However, it wasn't until the 20th Century that radiators were popularised as even up to the 1970s comparatively few homes had central heating. Steel was then introduced as the most popular option for radiator manufacture in the UK, supporting the British steel industry. Consequently, pressed steel corrugated panels became commonplace, despite the prevalence of aluminium radiators elsewhere in Europe.

For more information on radiators, be it reclaimed or reproduction cast iron, or the latest in designer models, then speak to an expert such as Feature Radiators.

Research makes it clear that many changes have taken place in heating products over the years.


Steam-heating systems were then developed and installed in the 1830s. The first was installed in the home of Governor of the Bank of England, John Horley Palmer, so that he could grow grapes in England's cold climate.

Cast iron radiatorsWhen it comes to renovations, choosing the right radiators is now often http://danielsair.com/ considered along with the wallpaper and floor coverings. Many consumers are keen to select radiators from the right era, to bring stylish authenticity to a period property, or to opt for a funky radiator design, to add the wow-factor to a contemporary interior.

Cast iron radiators available today are either "reclaimed", meaning they have been salvaged from older buildings, or "reproduction", meaning they are new but have been cast from original designs, with both options having a boom in popularity over the last decade. See our blog article "reclaimed vs. reproduction" for more information on this subject.

As many history buffs will be aware, the Romans were the one of the first to use "central heating" to warm their villas using a system called a hypocaust that used a furnace to heat air and conduct it through voids under floors. Similar systems were also used in ancient Korea, possibly even dating back to the Bronze Age. By 1700, Russian engineers had started designing water based systems for central heating.

Yet whatever style you opt for, be assured that there is no need to compromise on heat output, as good looks and performance are not mutually exclusive.

The Victorian period is greatly associated with the introduction of cast iron radiators that we are all familiar with and it was in this period that heating became not only a practical installation but also a decorative item.

Radiators, be they Victorian in style or ultra-modern designs, no longer have a humble' status within a room; they are now an essential centrepiece that serves a functional purpose as well as being a stylish accessory to complement any interior.

Any HGTV viewer knows that renovating is far easier said than done. That doesn't stop any of us from mentally making a few changes to our homes -- whether we own them or not -- even though we don't intend to hire a contractor anytime soon. Or, perhaps a renovation is actually within reach, but you're not pleased with the generic inspiration found at your local home superstore. No matter which camp you're in, you're bound to love these 10 websites that are for anyone who has ever looked at a wall...and thought about moving it.


porch dot <a href=http://www.homeadvisor.com/task.Central-A-C-Service-or-Repair.40074.html com" src="http://i.huffpost.com/gen/1609933/thumbs/o-PORCH-DOT-COM-570.jpg?6"/>

Best for: Actually committing to the whole renovation thing. Here, you can easily find professionals in your area and look over their best work.


Best for: Plotting your new, high-end dream home. Though the site has broadened its mission away from simply providing remodeling ideas (who would of thought?), you can still find great images waiting to be added to your "Dream Life" pinboard.


Best for: Seeing how a real family renovated (and continues to renovate) on a tight budget. While the blog can be a little wonky at times, the content is good.

This Old House

Best for: Fantasizing about a simpler, self-reliant life in a meticulously restored Victorian that was once nearly uninhabitable. It's specific, but you know what we mean. We imagine the editors finding their bliss at salvage yards, or trading recommendations about screwdrivers all while turning an old found door into a stately table. And we look up to them for that.

DIY Network

Best for: Finding practical advice and finding projects by budget. The network that brought you multiple Vanilla Ice-pegged reality shows has an exhaustive website that borders on overwhelming at times -- but they know their stuff.



Best for: Getting inspired to make changes big (overhauled kitchen) to small (paint color ideas) -- and seeing how hundreds of other people have done those very things.

HGTV Remodels

Best for: Figuring out what's actually doable versus what projects will have a bigger commitment. You'll see ideas ranging from clever storage tricks and closet ideas all the way to choosing a new addition's foundation.



Best for: Imagining an impeccably tasteful life filled with ridiculously functional (but incredibly designed) surroundings, alongside men with architectural glasses and women with indie-chic short haircuts.


Retro Renovation (Check it out in the video above!)

retro renovation

Best for: Anyone who doesn't think of a 1960s living room as a bad thing. Whether you're looking for resources for restoring your old home, adding retro flair to a newer place or just looking for the best midcentury inspired sofa, this is your heaven. I visit it daily.

Young House Love

alt="young house love" src="http://i.huffpost.com/gen/1609946/thumbs/o-YOUNG-HOUSE-LOVE-570.jpg?5"/>

Best for: Those with more traditional design tastes, especially those in need of family-friendly advice. The couple behind this blog has made a mini-empire based around their love of remodeling homes. We recommend taking a peek through their archives -- their first home remodeling project is a tad more accessible to the average homeowner than their current (though incredibly gorgeous) big house project.

Initially, sources of heat like wood fires and small-sized furnaces fueled with waste wood were used for a very long time. These were later replaced by furnaces that functioned by burning coal and other fossil fuels. Then the energy crisis and environmental issues resulted into the development of gas furnaces, which are now being replaced by electric furnaces (also called domestic furnaces). The functioning process of the latter is totally different from the ones that consumed fossil fuels. An electric furnace is different from the industrial type, and must not be mistaken with the one used to melt metals.

Working of an Electric Furnace

The basic function of this device is to maintain a higher temperature in a house or any building. As compared to furnaces that consume fossil fuels, electric ones are economical to operate due to their unique functioning process. The operation of any furnace depends upon the thermostat, which is a simple unit that acts like http://www.airconservicesg.com/repair.html a thermometer. This unit is set at a particular temperature. If this value falls below the set level on the thermostat, then the house starts to become colder. The drop in temperature is sensed by the thermostat, which alerts the electric furnace that is usually situated in the basement of a building. The most important component of the conventional electric furnace is the heating coil, which turns extremely hot when an electric current is passed through it. The heated coil in turn heats the temperature of the air around it. This air is then routinely blown into the house through a blower. The pressure that is exerted by the blower on the heated air warms it further. This air is blown into the house, and the uncomfortably low temperature rises to a very pleasing level. The cold air that was initially present in the house replaces the hot air in the electric furnace. This air is in turn heated by the heating coil of the furnace, and is blown back into the house. To maintain a supply of fresh air in the house, some furnaces also suck air from the outdoor atmosphere. However, this air is very cold, and heating it drastically increases the energy consumption of the furnace. After the air in the house reaches a particular temperature, the thermostat automatically shuts off the electric furnace.

The application of these furnaces is slowly being accepted universally, and has boosted the effort in energy savings and prevention of global warming.

See businesses, schools, and crimes near this home

Affordability Monthly mortgage for 513 Furnace Rd

Home Expenses For 513 Furnace Rd

Price History & Trends

Price History for 513 Furnace Rd

Date Event Price Source Agents 07/20/2005 Sold view http://www.familyhandyman.com/heating-cooling/air-conditioner-repair detail $54,000 Public records Public records Compare homes in the area to 513 Furnace Rd Real Estate Trends in 44030 Listing price for 513 Furnace Rd $169,900 Average listing price for similar homes $158,120 7% below listing price Average listing price for all homes in 44030 $85,347 99% below listing price Median sale price for all homes in 44030 $85,000 50% below listing price


Turn on the hot water in a sink or tub and check the lower heating element every couple of minutes. As hot water is drained from the tank it is replaced with cold water, and the tank will eventually become cold enough to turn on the lower heating element by applying voltage to that element. If the lower element never comes on the lower thermostat is bad and needs replaced.

Once the breakers are turned off, remove the two access panel covers shown in the photo to the right. You will find insulation inside, but it is cut to the size of the opening; pull this out and set aside for later re-installation. Now exposed is the thermostat and heating element, covered by a simple plastic cover. The top thermostat has a built-in circuit breaker button accessible through the plastic cover; push it and make sure it wasn't tripped. If you feel a "snap" or think that it had tripped you might turn on the power again and give it time to heat the water - this could have been the whole problem, although the question of why it tripped at all has not been addressed yet. If you continue to troubleshoot it would be best at this point to check that the power is indeed shut off by using a non-contact voltage detector if one is available. The only wires that you are assured of as being hot are the pair at the top; wave the detector in that area to see if it lights up or beeps.

Whether you have checked voltage or not, assume the unit is still powered. Carefully remove the plastic cover; they will usually either simply snap out or will need to be worked out from under a hold down support. Do not stick your fingers any further into the opening than is absolutely necessary! With the cover out of the way check for voltage at the top two screws by setting a voltmeter to a voltage setting of at least 240 volts and putting one test lead to each of the top two screws. If voltage is detected the power is not turned off yet; turn it off and re-check. Only when the power is turned off should you continue.

Testing the Heating Elements

See the photo for location of the heating elements. These are vaguely round, with a large hex nut behind them. There is one behind each access door, and each one will have two wires going to it. Remove one of the wires from the heating element and test for resistance (ohms) by setting the meter to the lowest resistance setting available. With a test lead on each wire terminal of one of the elements, read the resistance; it should be around 12 ohms for a common 4500 watt heating element. If the meter shows OL (overload) or infinite, the element is broken and needs replaced. If the reading is very low, perhaps http://alvaircon.com.sg/ just an ohm or two, the element will probably not last much longer and you can expect to replace it at any time.

With hot water in the tank check voltage at the lower thermostat by putting a test lead on each of the two screws on that thermostat. It should read 240 volts; if it does not the upper thermostat is bad and needs replaced.

Continue to run hot water in the sink. As the water in the tank continues to cool, it will reach a point when the lower thermostat shuts off and the upper thermostat turns the upper heater on. Continue to check the upper heating element for voltage - it may take quite a while and the water may have to quite cold, but it should come on eventually. If the upper element never comes on even though the water running in the sink is quite cold the upper thermostat is bad and needs replacement.


The first step in troubleshooting a hot water heater is to gain access to the areas to be tested. As you will need to get your fingers into the area occupied by hot electricity; turn off the power at the breaker panel. It will be a two pole breaker; that is, two breakers will be connected by a bar and will turn off together.

If either element needs replacement make sure you purchase one of the correct wattage and voltage.

Testing the Thermostats

Troubleshooting thermostats in a hot water heater requires that the power be turned back on. This will supply 240 volts to the heater; if you touch any bare wires or terminals you will receive a severe shock that can be deadly. Extreme caution is required!

Test voltage at both heating elements by putting a test lead to each wire terminal, one element at a time. There should be no voltage if the water in the tank is hot; if it is not allow some time to heat up and re-check. If one or both elements are "hot" even with hot water in the tank one or both thermostats need replacement, but it would be unusual to fail in the "on" position and the result would be water escaping from the safety valve at the top of the tank. More likely the water just isn't hot yet; give it some time. Once both elements are "off", proceed with the next step.

Next test with one lead on the metal tank itself and the other on one of the terminal screws. The reading should be infinite, or OL. Repeat for the other terminal screw. If either of these readings are anything but infinite the element needs replacement.
href="http://www.acdelco.com/auto-parts/air-conditioning.html">http://www.acdelco.com/auto-parts/air-conditioning.html href=''>

Low Refrigerant Level

The air conditioning system is an inherent and important part of the car, and is responsible for providing cooling to the passengers. It is a must if you are driving the car in a hot weather. But, to provide cooling and comfort to the travelers, it has to be kept in a well-maintained state. If it doesn't work, it's very difficult for passengers to travel, no matter what other facilities and luxuries are provided in the car. On that note, if it does not function and needs repair, this article provides some automobile air conditioning troubleshooting tips that you can follow.

Common Problems with the AC unit

Mechanical Complications

Step 3

Step 2


If the AC doesn't seem to work, the first step would be to check if the refrigerant is leaking out. Leaks are generally easy to find, but are very hard to be fixed. To check from where the refrigerant is leaking, you may get a fluorescent dye from a car accessories shop, and put it in the system by referring to the instruction on the can.

The system shouldn't be contaminated with air or moisture. If it is, it won't be able to work in an efficient manner. This is because, air tends to reduce the cooling capability of the AC, whereas moisture freezes and forms ice, which may choke up several parts of the system. The presence of air and moisture may be a result of leakages in the system, or missing out to vacuum purge the system prior to recharging it with a refrigerant.


While the car's engine is on, lift the hood and check if the compressor works. You also need to ensure that the compressor's clutch functions properly after switching on the AC. Check if anything needs to be replaced; such as switches, fuses, wires, fan belt, or the seal in the compressor. You need to check if the oil in the compressor is contaminated. If it is, flush the system to remove the old oil, put new oil, and then check if the AC works.

Dirty Condenser

Step 1

Air or Moisture in the System

You may even need to clean the condenser by using a good quality flushing agent, which would vaporize quickly without leaving residue in the system. If the condenser is used for many years and is giving frequent problems, it's time to replace it. For proper working of the AC system, it's recommended to periodically replace the accumulators, receiver driers, and the expansion valve.

There are chances of the tube or metering wall that lets the flow of refrigerant to the evaporator to be clogged by debris. This obstructs the free flow of the refrigerant to the evaporator, resulting in a low level of cooling. It may also damage the inner parts of the system, which run smoothly due to the refrigerant.

There are possibilities of some mechanical problems, such http://coolinger.com.sg/ as a faulty compressor clutch, defunct pressure switches, valve not working properly, and malfunctioning of the compressor. Any of the above problems need to be diagnosed and addressed by a skilled technician.

The condenser is a part situated in front of the radiator, which is responsible for cooling the high-pressure refrigerant's vapor that comes out of the compressor. If any kind of dirt is present in the condenser, it would lead to a blockage to the airflow, which would then provide no cooling. In such a case, cleaning the condenser would certainly resolve the problem.

I'm sure you must have got a basic idea about fixing car AC systems. If you want to repair the system totally, you might need to get the whole system replaced from a reputed car technician.


The AC needs a specific amount of refrigerant to work in an efficient manner. If the refrigerant is lower than the required level, the AC obviously will not provide cooling at its fullest.
That was my first mistake because once they got in they were not going to leave, she said, even though she admitted being somewhat rude toward the two.

She called the police, called her bank and called Dave Bick, who had installed the original furnace while working for Culliton Brothers Ltd. in 2010.



But she wants to tell her story in the hope that others don't fall victim to the scam.

Despite that, the woman told them that everything in the house was working fine and that she wasn't interested. That's when the sales pitch became more aggressive and non-stop, and eventually she let the two men in the door.

The woman said that the police who came to her home were helpful, but that their hands are tied.

The woman said the company telephoned 10 times looking for payment and she admits to being frightened that they might show up at her door. But the calls have stopped, for now, and she no longer answers her door or her phone unless she recognizes the caller on the call display.

When people come to the door selling things, always be on your guard, said Theocharis. If you're not sure, call the police. Some of these people are relentless and demand things from you. But nobody can come to your property and demand anything.

Some time after that she came to the realization that she had been scammed. A check of internet websites showed dozens of complaints about OEG, and one Toronto lawyer she spoke to said he has been fighting the company for two years.

You could tell it was a slam job rip hers out, put the other one in and then take off. Then the next question is, where's her furnace? They knew darn well there was nothing wrong with it.

I'm so thankful I wasn't hurt. It's a real wakeup call for me.

She signed the contract and gave them a void check. The company wanted to install their furnace the very next day, but because the woman was travelling out of town the installation date was set for a week later.

It was all very positive, that you'd be protecting the environment and that's good for Canada. Nothing you could disagree with. And then also, 'You're going to be saving so much money,' -- as much as $129 per month, they claimed.

Two men arrived at the woman's door unannounced at around 6 p.m. one night last month. In a friendly manner they explained that they were there to check people's appliances and furnaces to make sure they were up to environmental standards, and claimed that the government was supporting the program and offering rebates.

If they come to take my furnace, I'm calling the police and Dave Bick. They're not getting in unsupervised, she said.

You feel really stupid and don't want anyone to know how stupid you've been, she said. I can understand why people don't want to tell anybody. But I usually believe things happen for a reason, so if I can get the word out then maybe somebody else will not have to go through this.

They can't really do anything because I let them in my house and signed contracts, she said.

He said that people should be wary of any salesperson asking for personal information or claiming exaggerated savings by switching to their product. Bick said that there was no way that any new furnace could produce $129 in monthly savings.

Insp. Sam Theocharis of the Stratford Police Service said on Friday that police moved the company out of the city because they had not acquired a license to conduct door-to-door sales as required by a city bylaw.

The woman, in her seventies and living on her own, had a six-year-old high efficiency furnace pulled out of her home by Ontario Energy Group and replaced with an inferior product that she was supposed to rent for more than $80 per month for the next 15 years.

There was nothing wrong with the furnace that she had. They totally took advantage of her, said Bick, adding that the replacement furnace had a similar efficiency rating, but was sloppily installed. When you buy a furnace you're expecting it to be there for at least 20 years, especially when you're buying a good one. And you're not going to rip out a newer furnace even if you were getting slightly better efficiency.

She's since managed to close out her bank account in time to avoid any payments and has her lawyer taking action against the company. But she's lost a good furnace and been left with a potential legal and financial mess to sort out.

A Stratford woman who was duped by door-to-door furnace https://www.angieslist.com/articles/it-time-repair-or-replace-my-air-conditioner.htm salesmen says she feels foolish for giving in to their high-pressure sales tactics.

An unmarked white van pulled into her driveway on the scheduled date and two men installed the furnace.

They sounded very much like they were from the government, and they had their little badges on, the woman said. It's a very sophisticated operation. It's a performance. They could almost be in the theatre.

They told her that her top-of-the-line 96.5% efficiency furnace was no longer working properly. She didn't remember until much later that she had information in her files showing that the furnace had just been installed in 2010.
Report Abuse Additional Details If you believe your intellectual property has been infringed and would like to file a complaint, please see our Copyright/IP Policy

Report Abuse


Report Abuse Additional Details If you believe your intellectual property has been infringed and would http://alvaircon.com.sg/ like to file a complaint, please see our Copyright/IP Policy

Report Abuse


Report Abuse Additional Details If you believe your intellectual property has been infringed and would like to file a complaint, please see our Copyright/IP Policy

Report Abuse



- 629 mA EIFS - mineral wool lamella.

Open date : 2015-06-25

Fax: +49 39536759999

Time limit for receipt of requests for documents or for accessing documents: 8.6.2015

2015 Al Bawaba (Albawaba.com) Provided by SyndiGate Media Inc. ( Syndigate.info ).

COPYRIGHT 2015 SyndiGate Media Inc.

No portion of this article can be reproduced without the express written permission from the copyright holder.

Copyright 2015 Gale, Cengage Learning. All rights reserved.

Tender notice number : 186584-2015

Time limit for receipt of tenders or requests to participate: 25.6.2015 - 10:50

Url : http://www.dbknb.de

Deposits and Guarantees required: Sh. The tender documents.

Tender documents : T27533940.html

Address : Salvador-Allende-Str. 30


17036 Neubrandenburg

Telephone: +49 395367590

This contract is divided into lots: no

Contact point(s): Diakonie Klinikum Dietrich Bonhoeffer GmbH


17036 Neubrandenburg


Country :Germany

For the attention of: Frau Riewe

Language(s) in which tenders or requests to participate may be drawn up: German.

Email : bt@dbknb.de

Address : IN Plan GmbH

Platanenstr. 10

Contract notice: Lot 6 - etics facade construction projects; remodeling house r; part http://www.inspectapedia.com/aircond/Air_Conditioning.php construction project 1 f-complete renovation transition elements.

For the attention of: Frau Dobkowitz

Notice type : Tender Notice

Maecenas aliquet accumsan

Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos hymenaeos. Etiam dictum tincidunt diam. Aliquam id dolor. Suspendisse sagittis ultrices augue. Maecenas fermentum, sem in pharetra pellentesque, velit turpis volutpat ante, in pharetra metus odio a lectus. Maecenas aliquet
Or visit this link or this one